Installation Tutorials

1. Clean the phone with cleaning kit

2. Put the phone on the paper applicator

3. Align the screen protector with the paper applicator (Holes match Pins)

4. Fold upper cover to close the package box

5. One hand press & hold two top coners, and the other hand pull out release film

6. Press and Slide towards arrow direction, and Wait for 10 seconds

7. Tear off alignment film from bottom side

8. Use squeegee card to push out bubbles if any

1. Open the box and put the iPad onto the tray

2. Clean iPad screen till it is dust free

3. Put glass with holes of position film on the installation tray, and match with columns of installation tray

4. Close the box and press the palm area

5. Pull the strip all out. (Keep pressing the palm area)

6. Open the box, and wait 10 seconds for self adhesion

7. Tear off the top positioning film, installation complete

8. If there is any air bubble, use the squeeze card to gently push it out

1. Remove the old lens protector using the half-circle grooove

2. Clean the lens to remove any dust or smudges

3. Tear off release film

4. Simply align the lens protector onto the lens

5. Press each protector onto the lens for automatic alignment

6. Remove the easy-install tray to complete the process